Skip to main content

C2R Global Manufacturing - RX1.0PRO - Rx Destroyer™ Pro Series All-Purpose, 1 Gallon Bottles, Tethered Cap & View Gauge

In stock    
Sold by: 
4 Bottle / Case
C2R Global Manufacturing:
Please enter items in 0 at a time
Skip to main content
Note: Please purchase based on product "Code". Images are provided by manufacturers and might not represent the product accurately.
Skip to main content

Visa • MasterCard • Discover • American Express • JCB • Diners Club

visa MasterCard Discover American JCB Diners

Buy today, build your future

Pay over time

Your entire online order, split into 4 interest-free payments scheduled over a 6 week period.

No interest, ever

We charge the retail partner, not you. As long as you pay on time, there will be no additional fees.

No credit impact

Our instant approval decisioning process has zero impact to your credit score.

Buy now, Pay later Anywhere.

With QuadPay, you can shop at your favorite stores and pay over four installments.

Pay over time

Split any purchase into 4 installments over 6 weeks.

Pay anywhere

Shop with Quadpay via our retail partners or anywhere Visa is accepted.

No credit impact

Our instant approval decisioning process has zero impact on your credit score.

Compared to most disposal processes, the Rx Destroyer is a very simple user-friendly system that is inexpensive, quick, clean and environmentally friendly. The Rx Destroyer system utilizes environmentally friendly ingredients to instantly render pharmaceuticals unusable.
More Information
Manufacturer C2R Global Manufacturing
Categories Biohazard Waste Management, Pharmaceutical Disposal System
Code RX1.0PRO
Sold By 4 Bottle / Case
Require Prescription? No
Store Whole Surgical
Score: 4.8 from 1 - 5
42 Review
Jeffrey C. Review from
July 31, 2021
Dam good value
So design wise I love this frame, big fat arms, multiple options for assembly (you can do X style or deadcat, and the plate that sandwiches the arms can be undermounted, or mounted inside the frame (which diminishes stack clearance, but allows a slick bottom plate for under mounting battery), a plethora of camera mount options, etc etc. The hardware pack leaves a little to be desired, mine was short a set of motor mount screws, as well as the press nuts. Ive got an assorted stainless steel m3 hardware set off Amazon that remedied this. Would have also liked to have seen loc-tite pre applied to
Daniel A. Review from
October 13, 2021
Great Utility Frame - 6mm Arms rule for budget bashers
These is a seriously underrated frame in terms of being able to just get out there and fly. Some builds (especially with Emax Eco2 motors and budget stacks), you can fly these with full aggression, because they aren't pricy quads. The thicker 6mm arms absolutely party, and overall frame is stout. I wish the mounting accommodated more than just a Vista for DJI Digital, but that's a very minor complaint. Built mine as analog quads, and they fly effortlessly. Somewhat more importantly, despite the deadcat layout of the frame it flies locked in. Always apply blue loctite to the threads of bolts wh
Cody B. Review from
May 3, 2020
Solid 7" frame
I haven't put my hands on the other "versions" of the TBS S1 V3 frame that other shops sell but I've heard RDQ's is one of the better ones. The plates come pre chamfered and press nuts already installed which is awesome. The hardware is solid, and I'm glad there was extra 10mm M3 screws. This is because the M3 screws that came with my motors weren't long enough to accommodate the thick arms + TPU soft mounts so I switched them for the frame top plate ones (10mm is overkill for a top plate anyways). ALTHOUGH if you're using a 4in1 and FC that both have the taller vibration isolating grommets, I
Constantin L. Review from
June 1, 2021
excellent frame, like all previous source ones
I bought this frame for a long range build. It is on the heavy side, but I wanted something with extra durability. What surprised me was the blackbox. This is a very clean frame. I'm not using grease, and I installed arms on the inside, which is not how it was initially intended. Some cons: the frame is extremely heavy. This is definitely a 6s build with big beefy motors. Also even the deadcat still has props on camera.
ROGER C. Review from
November 16, 2021
This frame flies great in
This frame flies great in my opinion. Less than $40 shipped to your door can't be beat. Deadcat arms take most of the props out of view. I built one for long range analog runnin 1300kv/ bi-blades and was so impressed by it I'm now building a DJI version for my daily ripper on 1700kv/tri-blades. Nobody freestyles a deadcat 7" so far me to build 2 of these to fly the crap out of says a lot. I also have two 5" quads.
Ary C. Review from
February 2, 2021
Price is good. Implementation of Source One by RDQ is very good. Knurled stands are good. I wish it had a slightly higher upper deck because the body is short the space is limited. For LR I need extra BEC, DVR board and second FPV camera. Should it be taller than 30mm it would leave more vertical mounting space. I'm thinking now to use individual ESCs for that reason. It is Nice practical frame, perhaps to improve I would add the tail TPU for SMA and T mount even if it adds to the price.
Odell J. Review from
April 5, 2021
No better deal!
What an amazing value! I cant believe what you get for the price. The 6mm thick arms are something else. The only thing holding back a 5 star is the lack of appropriate height stack hardware. Very rigid frame with the right amount of flex. Very easy to tune.
Nick M. Review from
September 22, 2020
This is a great frame
This is a great frame for the $. Very robust and love the chamfered carbon. Plenty of space for the build, and the carbon is great quality. The hardware worked for my build but may need additional longer screws for a 30mm stack. Props are in view from the regular fpv camera mounting position, but not for a gopro.
James W. Review from
August 12, 2021
Best Budget 7" Frame
The best budget 7" frame you can buy. Not only does it looks great, but the cut and very clean with smooth edges. The is the most cost is lower than anything else you can find. This frame is very strong and can take a beating.
3Egger F. Review from
December 4, 2019
Good 7 Frame!
For the price tag, its a solid 7 quad frame! The arms are 6mm thick, so IDK if its an over-sight, but this kit came with screws that are way to short for securing the arms to the sandwich plate. The screws that I got are perfect for the 5 frame, which I have as well. Not a big deal, I have plenty of screws that made this work! There is alot of carbon dust on the frame, so wash your hands after building. All in all, if youre looking to build a 7 quad, this frame is as good, if not better, than most costing over double its price tag!
Adriano C. Review from
October 14, 2019
Very good frame, nice price but...
Hardware is downright insufficient, not enough screws. Carbon looks very good, nicely machined, but dusty and requires a good rinse before handling. Dead cat design will keep the props out of shot. Sturdy yet a little on the heavy side. Only takes full size cameras (nobody uses them) a micro is possible but you'll need a bracket which is not supplied. No antenna mount, but plenty options are available around.
Chris S. Review from
December 26, 2019
Good frame good price
The frame arms and plates were all well done, beveled and drilled with no imperfections. The hardware selection was acceptable on my frames. My frame runs Brother hobby motors, Clracing f7 and 4in1,full size falkor, akk vtx, and r9. This frame builds and flys well, and holds up well to poor flying. For the money you can't go wrong. And best of all rdq will get this frame and anything else you need to you fast, and stand behind it
Jack J. Review from
January 16, 2020
Bench Review:
I purchased this frame because of the open-source platform, and I'm pleased so far with its quality. Sturdy and well-cut carbon, everything seems symmetrical. My only complaint would be the hardware, the M3s for the bottom all protruded more than I was hoping, So i used my own hardware. There will never be a shortage of 3D print files for this frame, so this is also a great frame if you want to get into 3D printing.
Craig B. Review from
December 9, 2020
Great frame for the cost
I enjoyed building this simplistic frame. There is lots of space and the material is quality. I would recommend this frame to anyone getting into long distance flying. So far it has taken a beating without breaking.
Bryan M. Review from
February 14, 2020
Included hardware is inadequate
The frame is nice and the carbon is cut very well. My only gripe is the screws for mounting motors were no where near long enough. The stack mounting screws were also too short. Other than that it has performed well.
Debanga B. Review from
November 29, 2020
Super 7
Nice light frame. Very easy to build. A lot of space vertically. The dead car frame looks cool. Arm are solid. Overall the value for price is immense.
Jeramy H. Review from
August 16, 2021
Good solid frame. Plenty of
Good solid frame. Plenty of room for extras. Carbon and quality is excellent!
William C. Review from
October 6, 2021
Great frame so far. The
Great frame so far. The arms are thicc and good quality. The hardware is good too.
Keith P. Review from
June 5, 2021
Great frame, budget price. What
Great frame, budget price. What more can I say. You should have at least 2 of these already.
Leslie Y. Review from
July 28, 2020
Great frame at a great price!
I love the quality and cost of this frame. Goes together easily, parts fit well and enough space for all my electronics. This was my first 7in build and at this price I'd say it's a winner!!
Arvi T. Review from
November 15, 2021
Long Range version of the solid Source One
I'm building it to a light-ish 7" to get longer flight time. Very happy with the quality and value of the Source One.
Bradley Y. Review from
November 14, 2020
Good basic frame
Well made source one. Smooth edges, hardware worked great. Good flying basic frame. Cant wait to crash it!
Mike A. Review from
January 2, 2021
RDQ Source One is the best!
RDQ Source ones are the best Source ones. Chamfered carbon and all. The 7 inch is no exception. It is awesome!!!
Chris C. Review from
November 21, 2021
Dead cat
Love this carbon fiber frame.. slightly chamfered edges.... easy to fly
Robert R. Review from
May 27, 2020
Great Long Range Frame
This is a bullet proof frame. RDQ's is the only dead cat configuration for the Source One that I found. Perfect for a long range build.
Rolando C. Review from
July 26, 2020
Great 7" DeadCat
One of the best budget 7" Deadcat frame. Stiff enough to give steady flights. Lightweight, can't really ask for more at this price
Andrew N. Review from
January 22, 2020
Amazing Quality!!
I have a few "long range" builds (SuperG+, Glide, Marmotte). I was extremely impressed with the quality of this carbon and components. I'd recommend to anyone from beginner to experienced pilots.
Coty A. Review from
August 1, 2020
Needs a better hardware kit
Would be 5 but the included hardware didn't work seems like the same hardware that I got when I built a 5 inch source one from rdq so hey should look at making a better hardware kit but the carbon frame is nice, like that the deadcat style arms keeps the props out of view.
Erick N. Review from
April 10, 2021
Great budget 7in that is
Great budget 7in that is really durable. No complaints 5 Stars!
Mathew L. Review from
May 24, 2020
Love the frame. Percect for
Love the frame. Percect for my long range build.
Frederick B. Review from
December 19, 2020
Excellent price, strong and large
Excellent price, strong and large amount of space for FC an VTX. Will purchase again...
Carl G. Review from
July 21, 2020
Eehhh ya know. ......
Just wish the frame kit came with more.... Camera mounting something!
Freddy A. Review from
May 15, 2020
It took a few hard licks on the first few flights with no damage. Plenty of room for hardware.
Lewis M. Review from
November 7, 2020
Great frame plenty of space
Great frame plenty of space for all components and and its strong!!
Bryan T. Review from
January 30, 2022
Excellent frame for the price!
Excellent frame for the price!
Philip F. Review from
May 21, 2021
Awesome Frame
Very sturdy and easy to put together!
Jose C. Review from
June 3, 2021
Great deal and great price.
Great deal and great price.
Aaron F. Review from
January 2, 2021
Very nice carbon fiber on
Very nice carbon fiber on this frame
Diego p. Review from
February 11, 2020
Nice frame
Nice finishing and tough frame, a bang for your buck!
Jacob S. Review from
November 23, 2020
Space for dji in frame.
Space for dji in frame. Strang arms
Kristján G. Review from
December 18, 2020
Solid frame
The frame looks solid and thick, can't wait to try it out
Anthony K. Review from
June 27, 2021
Good frame with lots of room inside.
© All Rights Reserved. is part of SB Medical, a 2nd Phoenix, Inc. subsidiary.