Skip to main content

Nu-Hope - 2524 - Stoma Hole Cutter Tool

In stock    
Sold by: 
Each
Size:
‌ 1/2" Price
Nu-Hope:
2524
FSA Eligible
$16.44
Please enter items in 0 at a time
Skip to main content
Note: Please purchase based on product "Code". Images are provided by manufacturers and might not represent the product accurately.
Skip to main content

Visa • MasterCard • Discover • American Express • JCB • Diners Club

visa MasterCard Discover American JCB Diners

Buy today, build your future

Pay over time

Your entire online order, split into 4 interest-free payments scheduled over a 6 week period.

No interest, ever

We charge the retail partner, not you. As long as you pay on time, there will be no additional fees.

No credit impact

Our instant approval decisioning process has zero impact to your credit score.

Buy now, Pay later Anywhere.

With QuadPay, you can shop at your favorite stores and pay over four installments.

Pay over time

Split any purchase into 4 installments over 6 weeks.

Pay anywhere

Shop with Quadpay via our retail partners or anywhere Visa is accepted.

No credit impact

Our instant approval decisioning process has zero impact on your credit score.

• No awkward cutting with scissors - just press
• Consistent, accurate cuts.
• Cuts easily with minimum pressure -only hand pressure is required.
• Clear plastic handle allows you to see where to cut.
• Meant to cut through gelatinous substance only not paper or plastic.

More Information
Manufacturer Nu-Hope
Brand Nu-Hope
Categories Others, Hole Cutter, Ostomy Various
Code 2524
Sold By Each
HCPCS A4421
Product Size 1/2"
Require Prescription? No
FSA Yes
Store Stomabags
WHSXX IM1
Score: 4.7 from 1 - 5
     
47 Review
Morgan Review from
Home Depot
     
August 28, 2018
Awesome drill bit. I tested this bit on 1/8 inch regular steel and then 1/8 inch
Awesome drill bit. I tested this bit on 1/8 inch regular steel and then 1/8 inch stainless steel; it went through both materials really quick and rather easy. I have drilled several holes and it is not becoming dull. The ejecting spring built into the bit
Jim K. Review from
DrillsAndCutters
     
April 27, 2020
I haven’t used ut....
I am a locksmith, and occasionally I am required to prep doors for installation of a deadbolt or door knob. On the most recent event of having to do this, my bi-metal hole saw would not cut to the thin metal skinned residential door. A brand new by metal
Emtbender Review from
Home Depot
     
June 5, 2019
Cuts a beautiful hole in thinner metal electrical enclosures and metal studs. Th
Cuts a beautiful hole in thinner metal electrical enclosures and metal studs. The pilot point gets the pilot hole started quickly and limits the bit from walking. Next the carbide tips on the hole saw make short work out of the metal it encounters. Once t
BEAU4U Review from
Home Depot
     
July 27, 2019
I needed to drill some holes in 16 gauge plate steal ( 0.0625"-- 1.59 mm ). Firs
I needed to drill some holes in 16 gauge plate steal ( 0.0625"-- 1.59 mm ). First of all you need at least an 1/2" drill. From the picture you notice I am using a 18 volt Dewalt DC950 1/2" hammer drill.The first thing I did was remove the pilot bit. If yo
LucioHI Review from
Home Depot
     
August 10, 2019
So far pretty good even though I only used it on thin metals like for cable boxe
So far pretty good even though I only used it on thin metals like for cable boxes and other jobs. The auto eject is pretty cool and really helps out to not cut myself trying to remove a stubborn metal hole cut out. It got only one cut out a little caught
Autobroker Review from
Home Depot
     
October 23, 2018
This review is for a 3/4" carbide tipped hole cutting bit. All hole cutting bits
This review is for a 3/4" carbide tipped hole cutting bit. All hole cutting bits are not created equal. I've used those cheapo stamped bits that lose edge with even softer woods - junk. I've also used some pretty nice bits that have carbide tips (great f
sacherjj Review from
Home Depot
     
November 13, 2018
I shot some video of the unpacking, but unfortunately forgot to shoot video as I
I shot some video of the unpacking, but unfortunately forgot to shoot video as I was working with the bit. This design isn't as useful in a small 3/4" size as it would be in larger sizes offered. This is most likely to jam up as the gap between the pilot
DK Review from
Home Depot
     
August 17, 2018
Ok, if I would recommend this product why would I give it a 4 star rating. First
Ok, if I would recommend this product why would I give it a 4 star rating. First let me say that this drill bit is made of the highest quality. The carbine tip is nice and cuts smoothly thru the wood. I really like the larger base on the bit. It fits a 3/
Transplanted Review from
Home Depot
     
October 1, 2018
This drill bit is extremely well made. The carbide teeth are thick, and brazed u
This drill bit is extremely well made. The carbide teeth are thick, and brazed unto the bit well. The bit has some heft to it as well. The concept is simple...Drill a hole, and an integrated spring ejects the plug of material you've drilled. The reality i
MagDrill Review from
Home Depot
     
August 13, 2018
Used this to drill 40 - 7/8" dia holes in W8x15 steel beams. I did not have acce
Used this to drill 40 - 7/8" dia holes in W8x15 steel beams. I did not have access to a mag drill. So used this in my hand held 1/2" electric drill. First thing I did was break the pilot bit. But that was my fault. So ended up pre-drilling pilots holes an
Trogo Review from
Home Depot
     
July 27, 2019
The Drill America 1 inch Diameter Carbide-Tipped Hole Cutter is an ideal tool fo
The Drill America 1 inch Diameter Carbide-Tipped Hole Cutter is an ideal tool for drilling holes in sheet metal, cast iron or stainless steel materials. The cutting blades are carbide-tipped for durability, and the cutting depth is 1 inch. It has a standa
ChiefBob Review from
Home Depot
     
July 19, 2019
This is a unique hole cutter. It is very well made and is equipped with very str
This is a unique hole cutter. It is very well made and is equipped with very strong and plentiful carbide teeth. The spring inside it to eject the slug is a great feature but realize the spring feature also limits the depth to which you can drill at a tim
Emtbender Review from
Home Depot
     
August 14, 2019
Yes it makes the hole, but it has a fair amount of counter torque from your dril
Yes it makes the hole, but it has a fair amount of counter torque from your drill when it goes through the hole is just made, hang on tight. If you are planning to use this bit to drill holes for 1/2" conduit fittings you are probably not going to like it
Psmdiyer Review from
Home Depot
     
September 12, 2018
Wow.. What a wonder hole cutter! Was very surprised how sharp it is. You Do need
Wow.. What a wonder hole cutter! Was very surprised how sharp it is. You Do need to be careful when using it, due to this factor. It leaves a very smooth, clean, fine finish to th edges of the hole. It comes with a pilot drill and a hex key. It can be use
cb88 Review from
Home Depot
     
October 5, 2018
This design works much better for larger hole sizes. The auto ejection helps spe
This design works much better for larger hole sizes. The auto ejection helps speed the work process as you can quickly go from one hole to the next without digging out the slug from the bit. However, on this size bit, if the slug jams, there is almost no
BrownBuilt Review from
Home Depot
     
October 5, 2018
What an Excellent drill bit design. Used in both 1/8” steel and 1/2” plywood. Re
What an Excellent drill bit design. Used in both 1/8” steel and 1/2” plywood. Results were better than expected. On the plywood there was no blow-out whatsoever. The holes were clean. The only knock would be the ejection spring for wood cutting. It did no
Mc F. Review from
DrillsAndCutters
     
February 28, 2020
2-1/2" Carbide Tipped Hole Cutter, 3/16" Depth of Cut
The purchased 2 1/2" Carbide tipped hole cutter has performed beyond my expectations. The hole cutter was purchased to cut multiple holes into 3/16" carbon steel. I had purchased two cutters as I did not know the life expectancy of the cutters. To date I
Geoff Review from
Home Depot
     
November 12, 2018
The DMS 5/8 IN. Carbide tipped hole cutter with ejecting slug is a great tiny li
The DMS 5/8 IN. Carbide tipped hole cutter with ejecting slug is a great tiny little hole cutter. First off it is very small so it is perfect running wire or something like that. It is surprisingly sharp and cuts a nice clean whole with little effort. The
Fritz Review from
Home Depot
     
September 24, 2018
Wow!! I have used many hole saws. This one is incredible. I cut threw a piece of
Wow!! I have used many hole saws. This one is incredible. I cut threw a piece of oak faster than ever before and much to my surprise the slug was sitting on my drill press base. I have had to take old hole saws apart to remove the slug or had to push it o
Grumpy Review from
Home Depot
     
August 26, 2018
I used this tool in a drill press to cut a 3/4-inch hole in a 1/8-inch aluminum
I used this tool in a drill press to cut a 3/4-inch hole in a 1/8-inch aluminum plate. It cut quickly and left a clean, smooth hole. It produced some very long curled aluminum shavings, which is usually a good sign of a very sharp tool. It did not however
Deeve Review from
Home Depot
     
October 17, 2018
Do not rely on the catalog photograph - read the specific dimensions, especially
Do not rely on the catalog photograph - read the specific dimensions, especially chuck size. This product was ordered relying on the photo. It will only fit drills w/ larger chuck openings, not common home-owner drills. Also, the hole is going to be much
Paul C. Review from
DrillsAndCutters
     
April 30, 2020
Great tool, great value, I'll be back for more
So far twelve holes through 0.875" ductile cast iron (dry), no signs of tool wear. Cuts fast. Hole is barely oversize, nice sliding fit on a 1" shaft. Exactly what I wanted. Great tool, great value.
arco Review from
Home Depot
     
August 27, 2018
I do a lot of metal fabrication as a hobby. This cutter is stout and cuts a nice
I do a lot of metal fabrication as a hobby. This cutter is stout and cuts a nice hole. I normally use 1/4" or 1.8" mild steel for the things that I make and this has no trouble cutting through. I usually use this in my drill press with cutting oil, but oc
gobbles Review from
Home Depot
     
October 26, 2018
This tiny hole cutter was a perfect addition to my catalog of drill bits. Got th
This tiny hole cutter was a perfect addition to my catalog of drill bits. Got this one so that I can run cat5 cables to security cameras. the bit was great as a guide and the hole cutter made a nice clean hole. I loved that it came with a hex tool to take
JASON Review from
Home Depot
     
November 25, 2018
The image shown (at the time of the review) and the actual piece are different.
The image shown (at the time of the review) and the actual piece are different. It comes with Allen head to loosen and tight, the drill bit and a marked case, which I like for easy identification and storage. The drill bit works as a nice guide and I had
Gogreen Review from
Home Depot
     
September 26, 2018
The carbide hole cutter worked as expected. The ejecting slug worked with out an
The carbide hole cutter worked as expected. The ejecting slug worked with out any issues. I was able to cut through 12 gauge steel and light gauge steel with out it snagging or jamming. It worked well with my small projects I had with file cabinets and BB
JustSayin Review from
Home Depot
     
April 8, 2019
I needed to install a grommet to my Oklahoma Joe's Smoker and didn't want to use
I needed to install a grommet to my Oklahoma Joe's Smoker and didn't want to use a step drill bit. I want to make one hole and be done with it, so I ordered this 1-1/4 in. Carbide Tipped Hole Cutter by Drill America and it worked, one and done. Just make
Michael S. Review from
DrillsAndCutters
     
July 24, 2020
I was feeling a little
I was feeling a little nervous. Order on line... Guess I can send them back... I received them free shipping in a couple days. Great hole cutters! I feel pretty good now. Holes in three quarter flat bar no problem.
Anthony M. Review from
DrillsAndCutters
     
July 12, 2016
Perfect tool for the job
Adding a garbage disposal to my daughters house gave me limited options on where I could put the on/off switch. Using an "air" switch / button you can get at Home Depot I now needed to cut a 1&1/4" hole in the top corner of a stainless steel sink. Convent
xrandall Review from
Home Depot
     
October 30, 2018
If you've ever used a hole cutter and the material you were cutting got stuck in
If you've ever used a hole cutter and the material you were cutting got stuck in the center, you definitely need to try one of these! No more digging it out. With the auto-ejection, nothing will get stuck and you can simply move the hole saw off of the h
Gallon Review from
Home Depot
     
January 23, 2020
It's the drill bit of the gods ! I'm a...
It's the drill bit of the gods ! I'm a professional Locksmith with Austin mobile Locksmith LLC ( www.atxlocks.com and I used to blow through the miluakee bits . This one is light years better !
Mudjack L. Review from
DrillsAndCutters
     
September 15, 2017
Needed a bit
I am a Mudjacking contractor and needed to drill 1 5/8" holes into a steel under ground tornado shelter that was improperly back-filled. This bit is an odd size and not stocked locally. I ordered the bit from Drills and cutters online and upon arrival, wa
Bob M. Review from
DrillsAndCutters
     
May 4, 2016
A "true" hole size
I got tired of bi-metal hole saws that heat up thin metal surfaces while drilling, or skate across the drilling surface, scarring the work surface. The most common size hole I drill is 2 1/8 inch for metal doors, so I thought that a 2 1/16" saw would be f
Jeff B. Review from
DrillsAndCutters
     
December 5, 2017
Hole cutter
I bought this hole cutter to install a faucet on the stainless steel sink. The last one I did with another brand it took almost an hour. This hole cutter zipped right through it in 10 seconds very good quality and I really love the little plastic containe
Frank K. Review from
DrillsAndCutters
     
February 28, 2020
Perfect
Did what it was supposed to do . Made quick work of some heavy gauge galvanized steel. 4 holes in less time than it’s taking me to write this review. Highly recommend this quality tool.
Tom Review from
Home Depot
     
January 17, 2020
This holes saw was well worth the higher price above the standard hole saw. Perf
This holes saw was well worth the higher price above the standard hole saw. Perfectly dimensioned holes in steel.
Bev H. Review from
DrillsAndCutters
     
August 13, 2020
I replaced a stepper bit
I replaced a stepper bit with this Item to drill through 1/4” steel. This product is a great improvement! The carbide bit cuts through the steel must faster than a high end stepper bit.
L H. Review from
DrillsAndCutters
     
November 16, 2016
Lhorbert
I had to cut a 11/8" hole in 5/8" thick bronze. A hole saw from your local hardware store doesn't work. It leaves a lot of ridges. These cutters will leave a smooth hole. I did drill a small amount, pulled the cutter out and then blasted it with my air ho
Roland S. Review from
DrillsAndCutters
     
August 2, 2017
Second cutter from D.C. Dot com
One greater than an inch (forget size) one as stated both carbide....very good quality matter of fact. I use for amplifier chassis, steel and Au cut easy, clean in a snap can be re sharpened if needed. AND fast west coast delivery to an island with cargo
Oscar C. Review from
DrillsAndCutters
     
April 28, 2020
Seal America Llc in Houston Texas 77044
I have used these drill bits they work awesome I think best out there will need to use lubricant oil to cool the drill tip or WD-40 drill bit will last longer time. Price is expensive for 3 inch and above.
Jason G. Review from
DrillsAndCutters
     
July 16, 2020
Excellent drill bits. Cut through
Excellent drill bits. Cut through steel doors like it was nothing. Will buy from them again
Shawn M. Review from
DrillsAndCutters
     
February 14, 2018
Great Drill bit
Bought this to drill a 5/8” hole in my Calmini hardened steel front bumper. My other Drill bits did not even make a mark. This carbide bit cut through it with little to no problem. I kept it oiled up and it went right through. Thanks Drills and Cutters.
Eric F. Review from
DrillsAndCutters
     
September 26, 2018
Amazing Hole Cutter
I needed to cut a bunch of 5/8" holes in a sandwich of four sheets of 1/8" galvanized steel and tried the conventional drilling with three other types of drills, but nothing compared to the short work of the project. This is an amazing and awesome product
jaime126 Review from
Home Depot
     
September 30, 2018
I received this item pretty quick and is already assemble attached it to my dril
I received this item pretty quick and is already assemble attached it to my drill and its pretty sharp makes very fine cuts on wood. I have tried different things in different wood on 2x4s and 2x6s and 2x12s and I had no issues at all I certainly recommen
Jason M. Review from
DrillsAndCutters
     
April 1, 2019
Cuts like a hot knife
This cutter cut quickly thru 1 inch plate steel on the back of my dumpster truck to add a 7 pin connector. I did use a magnetic drill press to stay straight and cutting oil. Much less expensive than an annular cutter.
Ted Review from
Home Depot
     
August 13, 2019
Excellent cutting action with very stable penetration characteristics due to...
Excellent cutting action with very stable penetration characteristics due to pilot bit spring action. The 1” depth is very useful for double wall/plate applications.
Eric A. Review from
DrillsAndCutters
     
February 22, 2018
Greta Product, Great Price
I was looking for a quality product to do a difficult job. This bit was exactly what i was looking for and for a lot less than I expected to pay. Easy transaction with quick shipping. So happy with the purchase I bought another to keep on hand, just in ca
© Stomabags.com. All Rights Reserved.

StomaBags.com is part of SB Medical, a 2nd Phoenix, Inc. subsidiary.