Skip to main content

Synthes - 280.050S - SYNTHES DHS/DCS LAG SCREW 12.7MM THREAD/105MM-STERILE

Synthes:
280.050S
$119.83
CLEARANCE ITEM - NON RETURNABLE/REFUNDABLE
In stock    
Sold by: 
Each
Size: Price
Please enter items in 0 at a time
Skip to main content
Note: Please purchase based on product "Code". Images are provided by manufacturers and might not represent the product accurately.
Skip to main content

Visa • MasterCard • Discover • American Express • JCB • Diners Club

visa MasterCard Discover American JCB Diners

Buy today, build your future

Pay over time

Your entire online order, split into 4 interest-free payments scheduled over a 6 week period.

No interest, ever

We charge the retail partner, not you. As long as you pay on time, there will be no additional fees.

No credit impact

Our instant approval decisioning process has zero impact to your credit score.

Buy now, Pay later Anywhere.

With QuadPay, you can shop at your favorite stores and pay over four installments.

Pay over time

Split any purchase into 4 installments over 6 weeks.

Pay anywhere

Shop with Quadpay via our retail partners or anywhere Visa is accepted.

No credit impact

Our instant approval decisioning process has zero impact on your credit score.

Synthes Dhs/Dcs Lag Screw 12.7mm Thread/105mm-Sterile
More Information
Manufacturer Synthes
Code 280.050S
Sold By Each
HCPCS -
UPC -
GTIN -
Require Prescription? No
FSA No
Product notes CLEARANCE ITEM - NON RETURNABLE/REFUNDABLE
WHSXX GES
Score: 4.7 from 1 - 5
     
49 Review
Am G. Review from
albanycountyfasteners
     
August 26, 2021
Happy customer
The cat door came with screws but I lost them, then figured out they would have been too short anyway. Home Depot only carried longer screws with a hex head. I looked around online but prices were crazy and/or I had to buy 100 screws! I really appreciated that I could buy as many or as few as I needed from you and your selection (inventory) is incredibly huge. My purchase of six screws (two more than I needed but Im cautious by nature) came very quickly, which was nice in these days of delays and shortages. My cats can come and go as they please, so they are happy customers too. Thanks so much
Doug W. Review from
albanycountyfasteners
     
December 21, 2021
As expected
These were self-tapping screws. #12's. I used them to make a pair of 5' wide x 6.5' tall wood picket gates w/ 2" x 2" .065 galvanized square metal tubing frames. They worked exactly as expected. Should another job of that nature come up I'll certainly use them again.
Tom N. Review from
albanycountyfasteners
     
February 28, 2021
Like the old Days
I have used Albany for a couple of years while refurbishing small boats. Their company used to give you the option of individual screws and bolts long with the option of buying in bulk. For small stuff bulk is not a big deal but when you are buying HH 1/4-20 bolts or larger it gets 1 expensive and 2 storage. I understand its more effort to pick out 5 of one thing instead of the bulk bag but its making me look for other options online.
Steve K. Review from
albanycountyfasteners
     
October 12, 2021
Easy and Quick Solution
I recently purchased 2 stainless steel #10-24 x5" screws for an escutcheon plate in a shower I was renovating. I miscalculated the depth of the shower mixer by 1/4" and the screws that came with it were too short. Big boxes didn't have any stainless longer than 4" so I ordered from Albany County. The screws shipped quickly and I was able to avoid messing with the valve depth. Good value and I will buy from again if the need arises!
Keith C. Review from
albanycountyfasteners
     
November 4, 2019
SS pan head machine and oval head wood screws
Hi guys, I received everything I ordered, nicely packaged, and of very good quality. Unfortunately, the machine screws I ordered were incorrect for my application (my fault, not yours). I need both metric and us imperial which you do not offer at this time. The application is guitar pickup adjusting screws typically approximately 1.125" - 1.25" in length. The diameter is close to #4, possibly slightly smaller. Let me know if you can find them if I send you samples. Thank you and I look forward to doing business in the future, and will recommend you. Thanks again, Keith
Review from
albanycountyfasteners
     
November 18, 2016
NIASE MASTER AUTO TECH APPROVES
I hate begging for fasteners, standing in line or teaching young, under trained, self-assured parts personnel how to size & grade properly. I'm retired now and teaching my sons the automotive how to properly. This resource is guaranteed to deliver exactly what I ask for, every time. Our most recent project was the renewal of my son's 05 Acura TL A-SPEC front brake pads and rotors inclusive of replacing those flat head, countersunk rotor disc retaining fasteners. We used slotted and drilled rotors + stainless fasteners from Albany County Fasteners. Now with the project completed and perfected,
Curtis W. Review from
albanycountyfasteners
     
August 10, 2018
Screws
I purchased a rebuilt router from the manufacture's shop. The face plate was held on by three round top screws which protruded past the face plate. I looked everywhere near home to find 5 mm flat top machine screws. I searched Lowes, Home Depot, and Ace Hardware; all to no avail. A simple web search from Albanycountry fasteners who had several listed. Not being sure of the actual link I needed; I ordered three sets of different links. Deliery was quick and exactly what I needed to have my router up and running. ACF made my favorite page for web searches. You should see what they have listed on
John B. Review from
albanycountyfasteners
     
March 27, 2022
Brick & Mortar With A Solid on-Line Presence!
Extremely intuitive user interface with clear product descriptions. Very competitive prices. As a builder of sport racing automobiles this will be my go to catalogue for product.
Mr S. Review from
albanycountyfasteners
     
August 16, 2021
Albany County Fasteners to the rescue!
Albany County Fasteners had the hard-to-find screws and washers I needed to perfectly complete a restoration. And even though I was dealing in very small quantities, I got excellent personal customer support. THANKS!
Paul B. Review from
albanycountyfasteners
     
March 2, 2022
Screws and more
I have not used these yet. Albany County Fasteners is a great place to get a wide variety of screws and other hardware. Their prices are good and service quick. I will use them again!
Deaborah L. Review from
albanycountyfasteners
     
May 31, 2021
Good screws but Very poor customer service
I ordered & paid for 300 1/4-20x1-1/2 screws and received 8 screws without explanation of why they were short 292 screws! I called and was told I would get remainder following week. Didnt receive them either called again. Same story. Please respond.
Richard V. Review from
albanycountyfasteners
     
December 7, 2017
order review
The parts I ordered from you were very well organized. each item was sealed up in its own bag, with the quantity and thread description on a label on the bag. very neatly packaged. very nice! all the screws were clean and in good condition, none had any crossed threads. It's just like if I would have picked them out by hand for myself. Your company has good quality parts and does a very neat job of packing them up! If I ever need any special screws again in the future, I will definitely be coming to your company again.
Gerard F. Review from
albanycountyfasteners
     
August 18, 2020
order review
Contrary to your notice, I have not received this overdue order. Was led to believe I would receive it in 3 to 5 business days anda week and a half later still have not received it. To add insult to injury, you now want me to review the purchase. You need to get it together, and I am disgusted. Gerard Fischette
Thomas R. Review from
albanycountyfasteners
     
November 22, 2019
8-32 x 2" Phillips Flat Head Machine Screws Stn. Stl.
As a handyman, I order many sizes, lengths and head styles of Stn. Stl. fasteners in anticipation of what I might need for future projects. Such is the case with the subject fasteners. As yet, I have not used any of them. However, I have ordered many thousands of Stn. Stl. fasteners from Albany County Fasteners and have never been disappointed with any of their products.
janice k. Review from
albanycountyfasteners
     
January 27, 2019
Truss Head Screws
Finding your web site was a tremendous help in locating this particular item. We searched locally in all our hardware, Home Depot and tractor supply stores with no luck. You had exactly what we needed. You QUICKLY filled our order and the product was perfect. Your web site was easy to use and you describe every item precisely. I have your information in my file for further use. Thank you
Review from
albanycountyfasteners
     
May 3, 2015
You saved my $16k dive trip with needed spares
I needed #12-24 stainless steel screws for a camera housing to be used in salt water. Neither of the two major hardware stores in the DFW area had them. The maker of a needed adapter didn't answer emails for replacement screws. I couldn't take a month-long SCUBA trip half the world away without spares. ACF came through, and I got 50 for under ten bucks, including shipping. I tested them for corrosion in a 3% salt bath, like the oceans, and they came out shiny. Thanks. I passed this along to Ikelite, maker of U/W camera housings.
Anthony C. Review from
albanycountyfasteners
     
June 22, 2021
Excellent experience
I needed 1/4" 20 x 2-1/4 stainless steel pan head machine bolts which just about every store doesn't carry. It is either 2" 0r 2-1/2. Albany Fasteners had what I needed and I received them in a few days. Will definitely be using them again, Thanks
James D. Review from
albanycountyfasteners
     
October 28, 2019
Hi Quality Hardware
Came across Albany, purely by chance on internet searching for stainless metric machine screws. Of the three sites I found that offered what I needed, Albany's website was the easiest to navigate, and I found that the pricing was virtually same or better than the others. When ordering stainless, you can imagine the my first concern was not the price, but quality/longevity of the product. I found the product to be of high quality and expect, over time, that it should perform well.
Glen B. Review from
albanycountyfasteners
     
April 27, 2020
JUST WHAT I WANTED
These are replacement screws for the side skirts of my hot tub. Unfortunately the manufacturer didn't use stainless steel. My problem has been completely solved. Your website is easy to navigate and you are a pleasure to do business with. The prices are fair, but the shipping is a little more than i expected. Aloha, Glen
Jack F. Review from
albanycountyfasteners
     
July 12, 2019
1st time buyer.
The metric bolts I ordered worked well on the bed anchors I recently purchased that did not include the bolts. Lucky for me I have a thread chart to check sizes. I have not used the screws yet. They are for the replacement of the boards on my utility trailer which I am in the process of painting the frame 1st. My only gripe is the shipping was high for such a small order and weight.
woda3737.ffwuhwzcib Review from
ebay
     
May 24, 2016
For all you Hobbyists
If you're into model railroading these are a must to have along with the stainless steel nuts offered on E-bay. This and other small screws, washers, and nuts are needed when building a project in model railroading including restoration of locomotives. I've used many of these and I have re-ordered a few time. I'm sure other hobbies require small fasteners when building something. I usually order one size and custom cut them to required length with a Dremel cut-off wheel.
Michael K. Review from
albanycountyfasteners
     
September 5, 2018
Stainless screws and nuts
I found this store to be great. No more special trips to the hardware store looking for stainless. I bought enough of the different sizes I use in my radio restoration and other things. Prices are more than reasonable when you get quantities of a hundred or more. I highly recommend this outfit.
Review from
albanycountyfasteners
     
September 3, 2016
all the parts are standard, but the business is great
As always I get the standard parts I am looking for. I buy a good amount of fasteners every year for our kayak sail business www.falconsails.com and do a lot of shopping around for the best suppliers. Not long after I discovered Albany County Fasteners they turned out to by my first choice for years based on great variety, stock, quality, over the phone support when I need it, and price. Keep up the good work. Patrick Forrester Owner Falcon Sails
Matt L. Review from
albanycountyfasteners
     
March 27, 2018
Reliable Supplier
I've counted on ACF for hobbyist supplies and supplies for my small business alike. Believing in craftsmanship, I prefer using top quality fasteners & ACF has them en masse! Also happy doing business with a US company, something we should all do more often! Thanks again ACF for great products. Like a boomerang, I'll keep coming back!
Pamela B. Review from
albanycountyfasteners
     
April 28, 2020
Shipping Price
I thought the shipping chosen for this small quantity and weight of parts was pretty pricey. $10 USPS shipping for $10 worth of parts is expensive. A cheaper method may have been to chose an strong shipping envelope instead of their box. Just sharing. Otherwise the purchase was received in good shape.
Anthony W. Review from
albanycountyfasteners
     
March 6, 2021
Exactly as described
3/8 x 16 flathead machine screws aren't easy to come by. These fit my project perfectly. Note they require a #4 Phillips driver, which I could not get at my neighborhood hardware store.
Review from
albanycountyfasteners
     
March 16, 2014
Great Source for Hard to Find Items
I am restoring a vintage MGB roadster. Many of the bolts and screws are odd sizes and hard to find at local hardware stores. A quick browse on the internet and I found Albany County Fasteners. Am I glad I did! Not only do they have the items I needed so desperately, but they were priced way below most other suppliers. I have them bookmarked and will be using them again in the future. I highly recommend them as a premier provider of unique hardware at rock bottom prices. Thanks.
Review from
albanycountyfasteners
     
May 10, 2016
Better than Big Stores!
Don't waste your time getting hardware from the big stores like Hxxx Dxxxx, Lxxx'x, or especially WxxxMxxx. These are better quality, are delivered to your door fast (usually in under a week for me), & MUCH better priced. Most stainless items are priced below the zinc plated versions in the big stores so you have no fear of sacrificing quality for price. This is ALWAYS the first place I look for any kind of fastener.
David G. Review from
albanycountyfasteners
     
May 1, 2018
Good prices, service, and products!
I have come to Albany County Fasteners on several occasions to find stainless steel screws for different projects. I had searched at local hardware stores and became frustrated at the lack of options and the cost. Not here at ACF. I found what I wanted and at a really good price. Thank you!
mark g. Review from
albanycountyfasteners
     
November 5, 2018
Just discovered this company. Love it.
They have every stainless steel fastener imaginable. But most importantly, inexpensive shipping. Many other websites will charge you more for shipping than your actual items when buying a small batch. Will definitely buy from here again.
Maria G. Review from
albanycountyfasteners
     
April 12, 2018
Super fast, exactly what I needed
Difficult to find stainless hardware was in stock and sent out immediately. I received product way before I expected it. Ideal size and quality for my application. Hope that the stainless can tolerate the marine environment. Thanks Albany!
James W. Review from
albanycountyfasteners
     
April 20, 2022
Good fastener, Great price
This is the second time we have order from Albany. Seems like they have all the hard to find metric screws and nuts.
1in7000 Review from
ebay
     
October 11, 2016
Good screws, just a tad short
The material and machining of these screws is very good. My only complaint is that they are a tad shorter than 5/16 - closer to 9/32, which may not seem like much but can make a difference when you are trying to size the screw for a blind hole like I was. But I don't know that the tolerance is any worse than any other bulk screw. Still a good screw.
Phil T. Review from
albanycountyfasteners
     
March 28, 2021
Hard to find
These screws were for a marine environment application. Had to be stainless steel and square drive. Impossible to source locally.
Review from
albanycountyfasteners
     
February 7, 2016
My favorite supplier for anything not found nearby
I live in a Dallas suburb and have a couple of great hardware stores within 25 miles. Couldn't find things at any locally. Albany can supply things I can't find locally and even things I can, at a competitive price, and within a few days. I also save time and mileage over local shopping. Albany County is the best place to shop for hardware online.
marcmiville418 Review from
ebay
     
October 24, 2016
The Good Stuff
For anyone restoring vintage electronics, a sweet stash of pan head machine screws #4-40 is a must have. Not readily available in renovation centers and becoming ever rare in specialty shops; good thing we can still have them on here. Stainless steel quality ( get the keps nuts that go with them)
Stephen G. Review from
albanycountyfasteners
     
November 12, 2019
Only Buying Here
Bought these as part of a larger order of assorted machine screws and different types of washers and nuts. Prices are great. Quality is great. Shipping is fast. I can get what I need quickly.
Review from
albanycountyfasteners
     
April 23, 2017
No rust black oxide
I'm a returning customer and was looking for more stainless steel hardware when I came across these black oxide coated screws. I've always liked the look of black oxide hardware, but did not like the rust that came with them. Now I have the best of both worlds. Thank you!
James L. Review from
albanycountyfasteners
     
April 2, 2022
Good fasteners. Oxide treatment stays
Good fasteners. Oxide treatment stays on screws
BRIAN D. Review from
albanycountyfasteners
     
May 26, 2020
OVAL HEAD MACHINE SCREWS
Great product , without the sharp edges or burrs that are evident with inferior brands at the big box stores. Will install the fasteners this week, but this product is fantastic, the service and assistance is UNMATCHED and I will definitely use ACF in the future.
Review from
albanycountyfasteners
     
December 14, 2015
Stainless 5/16 x 21/2" Pan head Mach Screws
As always , the great folks at Albany County Fasteners came through with flying colours. Excellent quality, Excellent price and fast shipping. 5 Star rating. Merry Christmas everybody! Will Ace Peninsula Hardware Williamsburg , Va
David G. Review from
albanycountyfasteners
     
January 9, 2018
Thread Count 28 bolts with phillips head
I was not able to find bolts of 28 thread count with a Phillips head at local hardware store. As such, I searched the web and found your site. What was great was that after ordering, I was able to receive my order within a couple of days. This allowed me to complete my project. Well Done!!!!
Sam A. Review from
albanycountyfasteners
     
September 3, 2021
Excellent quality
Needed Phillip head metric screws and they we not easy to find. These did the job perfect and they shipped quickly.
Review from
albanycountyfasteners
     
July 7, 2017
Great replacement for Kramer Spector cover plate screws!
I have been looking for replacement screws for the cover plate for a Kramer NS-2 bass. The new screws that Spector uses now are not the same. These are exact duplicates. I was very happy. Thank you!
Mark M. Review from
albanycountyfasteners
     
January 20, 2020
Hardware for my dBot build
Great selection of SS M5 and M3 fasteners for my project. All the threads were clean and the heads were well formed. Nice price, fast shipping. What more could you want?
Charles A. Review from
albanycountyfasteners
     
January 24, 2018
SS Hardware
I'm not a business, but I use a lot of SS screws, bolts and nuts since I do all of my own marine maintenance. I'm currently rebuilding and restoring a 1989 Regal Sebring and I have been very please with all the hardware I have received from Albany. Thank you for yourfine selection.
Review from
albanycountyfasteners
     
February 4, 2017
Five Stars
I highly recomend Albany County Fasteners as a reliable and business like company. My contact Ms. Elisabeth she treated my order like it was for one thousand dollars, when in fact the total was just nine dollars. Thanks Liz Trevor.
John P. Review from
albanycountyfasteners
     
February 2, 2019
Perfect as always! Albany rocks!
Albany is always perfect, exact, and fast. Packaging is excellent, shipping is reasonable. If they have any questions, they take the time to call. I wish I lived next door!
Craig C. Review from
albanycountyfasteners
     
July 25, 2020
Very good quality. Quick and easy.
I used these to attach bench casters to my ENORMOUS woodworking bench. They were perfect.